New Windshield

The new windshield just arrived from LP Aero Plastics Inc. Placed it on the body and the size appears to be perfect. The one thing I still have to do is drill the holes for mounting. It looks opaque, but that's just the protective covering, it's clear.

Three down, one to go.

The rear rims are a bit bigger than the fronts. A whole lot more work to do.

Gearbox Plate

Studs are fitted and the gearbox plate installed. Rear suspension attached, and I guess for now ,this assembly is pretty much finished. There will be little odds and ends, but this will be needed to be fitted to the car and engine.

Starter Motor

Starter motor is overhauled, and ready to go.

More snow and cold weather.

Monday it snowed about 6" , windy and has been in the low teens. March has definitely arrived in as a Lion. On the phone with Jim the other day(engine rebuilder), looks like most of the engine I dropped off will be usable. The crank, block, heads, pan, are OK. The rods might be usable too. The pistons and cam will be replaced. The cam was real old school, it would have required very high revs to produce HP. This engine when completed should go the whole season with very little maintenance. Jim said next week he'll start assembling it.

Two down, two to go.

The front rims are done, now the back. Also the replacement studs are finished for the gearbox plate.

Starter Motor

The starter motor was among missing items when I purchased the car. Figured no big deal, it's a Chevy. Sent a email to the group(fellow Lola restorers)and the response was not good. Reinhold sent a photo of his starter(Lola T190) and the message, you better start looking, your not finding this at a store. And he was right, it uses a reduction gear and works off a smaller flywheel. Immediately I called Chuck Haines at Can-Am cars, yes he had one left. Phew, that was close. I think this is the first time it's been apart. Working on the rest of the missing parts list now. The first race comes in June at Mid-Ohio.

One down, three to go

As with everything else on the car, the more you do the faster you get. Should have all done by mid-March.

Gear box plate

I have always had the suspicion that the gearbox was never used on this car. The serial # was way to early for the year of the car. On the early Lola's they used a plate that attaches to the gearbox cover. When I placed the plate on the cover the studs where to short to attach the nuts. Will have to make up some new studs, no big deal.

A little more

Now have most of the right and left side done.

Wheels

All it takes is a lot of elbow grease. I'll tackle one a week. The centers where blue, found that Ford engine block paint to be the closest color "Old Ford Blue".

Windshield

Eric out on the West coast sent me a windshield off a Lola T192. Now I can send a very good example to the shop to copy and make a new one for me. Should be ready in 3 to 6 weeks.

And a little bit more.

A few more parts connected.

More right rear

Trying to stay ahead on parts I need, but it's going together with no big problems. As always, the left side will go together a lot quicker.

Right Rear

Continuing to attach suspension parts. This attaches to the lower A-arm, when I took it apart, both sides where really loose. Filing down washer to make it snug. Rubber donut with spacers, worked perfect.