Right Rear

Continuing to attach suspension parts. This attaches to the lower A-arm, when I took it apart, both sides where really loose. Filing down washer to make it snug. Rubber donut with spacers, worked perfect.

Lola rims

Removed the other 3 tires from the rims. No scary problems where uncovered, that's good.

Axle Donuts

I got lucky on the pipe spacer I have to make. Ordered it from "Aircraft spruce", the insider diam. is just the right size. It will slide just over the bolt on the axle with no play. But as with everything else, I placed it on my lathe to cut the size I need, and the belt broke. The old "oh well", lots of other things that need attention while I wait for the new belt to arrive.

Chevy 302

Finally located a engine builder in my area. Drop it off a Coleman Racing Engines in CT. Jim the owner is a Chevy guy. In fact he built engines for Bill"Grumpy" Jenkins(drag racer). Guess I'll find out the good or not so good news soon on the cost.

Donunts

Received the new donuts, a bit lighter and about 1/2" inch narrower. I know they where smaller, but still designed for the 500hp range. I'll make spacers to take up the 1/2".

Rear Suspension

Laying out the rear suspension and making a list of hardware to order.

Universal joints

UPS dropped of the Universal joints and have started installing. Demounted one of the tires and looking at the rims. A lot of work to clean these up. I'll spread this work over the next month. Bit the bullet and ordered 2 new donuts. Ouch!$$$

Donuts anyone?

I've ordered new universal joints, should be in this week. Had a old universal box that came with the car and used that # to order. Next I've prepared the half shafts for the new donuts. This week I should order them too. Waited on these cause there so expensive. The car originally came with smith gauges, some were replaced with SW. Found a NOS Smith oil pressure gauge. Now looking for a oil temp gauge.